Introducing the CAVIUS Wireless Family

Cavius alarms are the ideal solution for home safety
October 5, 2018
Less than 5% of UK Households have a Fire Escape Plan
December 10, 2018
Show all

The CAVIUS Wireless Alarm Family uses innovative Radio Frequency technology, our Wireless Family alarms connect with each another offering extra protection for your home and family.

The CAVIUS Wireless Family is made up of the CAVIUS Wireless Photelectric Smoke Alarm and the Wireless Thermal Heat Alarm.

The Wireless Photoelectric Smoke alarm has been designed to detect a wide range of types of smoke in the home and is ideal for installing in bedrooms, lounges, and hallways.

The Wireless Thermal Heat Alarm is designed to detect a rapid and constant increase in heat, the thermal heat alarm is ideal for places where you cannot traditionally install smoke alarms; these areas include kitchens, garages, workshops and laundries.

So, what is the CAVIUS Wireless Family?

The Wireless Family Smoke Alarms  and the Wireless Family Thermal Heat Alarms work to protect every part of your home by syncing with one another using new RF technology.

This wireless synchronisation means that if there is a fire in one room of your house, the other Wireless Smoke Alarms and Thermal Heat Alarms will sound an alarm too.

The benefit of this is that everyone in your home, whether they’re upstairs, downstairs, or even in a separate wing of the house, will know immediately if there is a potential fire developing somewhere in the home.

The alarm that is at the source of the fire will flash for fast identification.

Turning all your alarms off is made easy with the CAVIUS Wireless Smart Remote.

Battery Life

The CAVIUS Wireless Photoelectric Smoke Alarm comes fitted with a 5-year long-life battery. CAVIUS devices have a 30-day low battery warning, increasing your chances of identifying that your battery and smoke alarms need to be replaced.

Setting up your Wireless Family

The process for syncing up your Wireless Family alarms is simple; set all your Wireless Family alarms into ‘LEARN/LINK’ mode, press the test button on one alarm which creates a ‘Master’ – the ‘Master’ sends out a unique code to all your other alarms. Place the alarms back into ‘NORMAL’ mode and you are ready to install.

The range of the alarms depend on the building materials and should be tested in each individual case. During our product testing of the Wireless Family, the alarms connected at a minimum of 100m in an open field and have been set up and tested successfully in a standard two level, four-bedroom home.

You can purchase the CAVIUS Wireless Photoelectric Smoke Alarm and Wireless Thermal Heat Alarm, here.

For more information on our safety products, click here.

To speak to our team, call: 0330 999 0019